Introduction

PowerDNS is a powerful DNS server that supports various backends for dynamic DNS management, while PowerAdmin is a web-based front-end for managing PowerDNS. In this guide, you will learn how to install PowerDNS and PowerAdmin on Rocky Linux, which can be effectively hosted on a Linux VPS UK for enhanced performance and security.

Prerequisites

• A Rocky Linux server with root access
• Basic knowledge of Linux commands
• An active internet connection

Step 1: Update Your System

Start by updating your package index and upgrading existing packages:

sudo dnf update -y

Step 2: Install PowerDNS

Install PowerDNS and the necessary dependencies:

sudo dnf install pdns pdns-backend-mysql -y

Ensure that the MySQL server is installed, as it will be used as the backend for PowerDNS.

Step 3: Install MySQL Server

If you don’t have MySQL installed, you can install it with the following command:

sudo dnf install mysql-server -y

Start and enable the MySQL service:

sudo systemctl start mysqld
sudo systemctl enable mysqld

Step 4: Secure MySQL Installation

Run the MySQL secure installation script to set the root password and secure your installation:

sudo mysql_secure_installation

Step 5: Configure PowerDNS

Open the PowerDNS configuration file:

sudo nano /etc/pdns/pdns.conf

Add the following lines to configure the MySQL backend:

launch=gmysql
gmysql-host=localhost
gmysql-user=pdns
gmysql-password=your_password
gmysql-dbname=pdns

Make sure to replace your_password with the password you set for the MySQL user.

Step 6: Create the PowerDNS Database

Log in to MySQL and create the PowerDNS database and user:

sudo mysql -u root -p

Run the following SQL commands:

CREATE DATABASE pdns;
CREATE USER 'pdns'@'localhost' IDENTIFIED BY 'your_password';
GRANT ALL PRIVILEGES ON pdns.* TO 'pdns'@'localhost';
FLUSH PRIVILEGES;
EXIT;

Step 7: Start PowerDNS

Start the PowerDNS service and enable it to run at boot:

sudo systemctl start pdns
sudo systemctl enable pdns

Step 8: Install PowerAdmin

Download and install PowerAdmin:

wget https://github.com/PowerDNS-Admin/PowerDNS-Admin/archive/refs/heads/master.zip
unzip master.zip
sudo mv PowerDNS-Admin-master /var/www/html/poweradmin
sudo chown -R apache:apache /var/www/html/poweradmin

Step 9: Configure Apache for PowerAdmin

Create a new Apache configuration file for PowerAdmin:

sudo nano /etc/httpd/conf.d/poweradmin.conf

Add the following configuration:

<Directory /var/www/html/poweradmin>
    Options Indexes FollowSymLinks
    AllowOverride All
    Require all granted
</Directory>


    ServerName yourdomain.com
    DocumentRoot /var/www/html/poweradmin

Replace yourdomain.com with your actual domain name.

Step 10: Restart Apache

Restart the Apache service to apply the changes:

sudo systemctl restart httpd

Step 11: Access PowerAdmin

Open your web browser and navigate to http://yourdomain.com. You should see the PowerAdmin interface. Follow the on-screen instructions to configure your DNS settings.

Step 12: Conclusion

You have successfully installed PowerDNS and PowerAdmin on Rocky Linux. This DNS management solution can significantly benefit from being hosted on a Linux VPS. For additional options, explore various Linux VPS solutions, including Linux VPSVirtual Private Server Hosting and Linux VPS Hosting UK for optimal performance and security.

Step 1: Update Your System

Before installing any new software, ensure your system is updated. Run the following commands to update and upgrade your Rocky Linux system:

sudo dnf update -y && sudo dnf upgrade -y

This ensures your system has the latest security patches and updates, which is essential whether you’re deploying PowerDNS on a local machine or on a VPS Linux VPSServers platform.

Step 2: Install MariaDB

PowerDNS requires a database to store its zone and record data. We will use MariaDB for this setup. Install MariaDB using the following commands:

sudo dnf install mariadb-server mariadb -y
sudo systemctl start mariadb
sudo systemctl enable mariadb
            

Secure the MariaDB installation by running the following:

sudo mysql_secure_installation

Follow the prompts to secure your installation, including setting a root password and removing anonymous users.

Step 3: Create a Database for PowerDNS

Once MariaDB is installed, create a database and user for PowerDNS. Log in to the MariaDB shell:

sudo mysql -u root -p

Then, run the following commands to create a database and user for PowerDNS:

CREATE DATABASE powerdns;
CREATE USER 'powerdns_user'@'localhost' IDENTIFIED BY 'yourpassword';
GRANT ALL PRIVILEGES ON powerdns.* TO 'powerdns_user'@'localhost';
FLUSH PRIVILEGES;
EXIT;
            

This sets up the database for PowerDNS, preparing it for installation, whether you’re hosting locally or on a Linux VPS hosting UK.

Step 4: Install PowerDNS

PowerDNS can be installed using the official repositories. Run the following commands to install PowerDNS and the MySQL backend:

sudo dnf install pdns pdns-backend-mysql -y
            

After installation, configure PowerDNS to use the MySQL backend by editing the PowerDNS configuration file:

sudo nano /etc/pdns/pdns.conf

Add or update the following lines to connect PowerDNS to your MariaDB database:

launch=gmysql
gmysql-host=localhost
gmysql-user=powerdns_user
gmysql-password=yourpassword
gmysql-dbname=powerdns
            

Save the file and restart PowerDNS:

sudo systemctl restart pdns
sudo systemctl enable pdns
            

PowerDNS is now installed and connected to the database. This setup will work for both local environments and cloud-based servers such as a Linux VPS Italy.

Step 5: Install PowerAdmin

PowerAdmin is a web-based tool for managing PowerDNS. Install the necessary dependencies for PowerAdmin:

sudo dnf install httpd php php-mysqlnd php-mbstring php-xml -y
            

Download PowerAdmin from GitHub:

cd /var/www/html
sudo git clone https://github.com/poweradmin/poweradmin.git
            

Set the correct permissions for the PowerAdmin directory:

sudo chown -R apache:apache /var/www/html/poweradmin
            

Restart Apache to apply the changes:

sudo systemctl restart httpd

Step 6: Configure PowerAdmin

Navigate to http://your-server-ip/poweradmin/install/ in your web browser to complete the PowerAdmin installation. Enter the database details you created for PowerDNS, and follow the prompts to finish the setup.

After completing the setup, you will have access to the PowerAdmin web interface to manage your PowerDNS server, whether it is hosted locally or on a Linux VPS hosting UK.

Step 7: Secure PowerAdmin with Let’s Encrypt SSL

To secure your PowerAdmin instance, you can use Let’s Encrypt to obtain a free SSL certificate. Install Certbot:

sudo dnf install certbot python3-certbot-apache

Run Certbot to obtain and configure the SSL certificate for your domain:

sudo certbot --apache -d your-domain.com

Certbot will automatically configure Apache to use SSL, ensuring that your PowerAdmin interface is securely accessible, whether locally or on a Linux VPSVirtual Private Server hosting environment.

Introduction

PowerDNS is a powerful DNS server that supports various backends for dynamic DNS management, while PowerAdmin is a web-based front-end for managing PowerDNS. In this guide, you will learn how to install PowerDNS and PowerAdmin on Rocky Linux, which can be effectively hosted on a Linux VPS UK for enhanced performance and security.

Prerequisites

• A Rocky Linux server with root access
• Basic knowledge of Linux commands
• An active internet connection

Step 1: Update Your System

Start by updating your package index and upgrading existing packages:

sudo dnf update -y

Step 2: Install PowerDNS

Install PowerDNS and the necessary dependencies:

sudo dnf install pdns pdns-backend-mysql -y

Ensure that the MySQL server is installed, as it will be used as the backend for PowerDNS.

Step 3: Install MySQL Server

If you don’t have MySQL installed, you can install it with the following command:

sudo dnf install mysql-server -y

Start and enable the MySQL service:

sudo systemctl start mysqld
sudo systemctl enable mysqld

Step 4: Secure MySQL Installation

Run the MySQL secure installation script to set the root password and secure your installation:

sudo mysql_secure_installation

Step 5: Configure PowerDNS

Open the PowerDNS configuration file:

sudo nano /etc/pdns/pdns.conf

Add the following lines to configure the MySQL backend:

launch=gmysql
gmysql-host=localhost
gmysql-user=pdns
gmysql-password=your_password
gmysql-dbname=pdns

Make sure to replace your_password with the password you set for the MySQL user.

Step 6: Create the PowerDNS Database

Log in to MySQL and create the PowerDNS database and user:

sudo mysql -u root -p

Run the following SQL commands:

CREATE DATABASE pdns;
CREATE USER 'pdns'@'localhost' IDENTIFIED BY 'your_password';
GRANT ALL PRIVILEGES ON pdns.* TO 'pdns'@'localhost';
FLUSH PRIVILEGES;
EXIT;

Step 7: Start PowerDNS

Start the PowerDNS service and enable it to run at boot:

sudo systemctl start pdns
sudo systemctl enable pdns

Step 8: Install PowerAdmin

Download and install PowerAdmin:

wget https://github.com/PowerDNS-Admin/PowerDNS-Admin/archive/refs/heads/master.zip
unzip master.zip
sudo mv PowerDNS-Admin-master /var/www/html/poweradmin
sudo chown -R apache:apache /var/www/html/poweradmin

Step 9: Configure Apache for PowerAdmin

Create a new Apache configuration file for PowerAdmin:

sudo nano /etc/httpd/conf.d/poweradmin.conf

Add the following configuration:

<Directory /var/www/html/poweradmin>
    Options Indexes FollowSymLinks
    AllowOverride All
    Require all granted
</Directory>


    ServerName yourdomain.com
    DocumentRoot /var/www/html/poweradmin

Replace yourdomain.com with your actual domain name.

Step 10: Restart Apache

Restart the Apache service to apply the changes:

sudo systemctl restart httpd

Step 11: Access PowerAdmin

Open your web browser and navigate to http://yourdomain.com. You should see the PowerAdmin interface. Follow the on-screen instructions to configure your DNS settings.

Step 12: Conclusion

You have successfully installed PowerDNS and PowerAdmin on Rocky Linux. This DNS management solution can significantly benefit from being hosted on a Linux VPS. For additional options, explore various Linux VPS solutions, including Linux VPSVirtual Private Server Hosting and Linux VPS Hosting UK for optimal performance and security.

Step 1: Update Your System

Before installing any new software, ensure your system is updated. Run the following commands to update and upgrade your Rocky Linux system:

sudo dnf update -y && sudo dnf upgrade -y

This ensures your system has the latest security patches and updates, which is essential whether you’re deploying PowerDNS on a local machine or on a VPS Linux VPSServers platform.

Step 2: Install MariaDB

PowerDNS requires a database to store its zone and record data. We will use MariaDB for this setup. Install MariaDB using the following commands:

sudo dnf install mariadb-server mariadb -y
sudo systemctl start mariadb
sudo systemctl enable mariadb
            

Secure the MariaDB installation by running the following:

sudo mysql_secure_installation

Follow the prompts to secure your installation, including setting a root password and removing anonymous users.

Step 3: Create a Database for PowerDNS

Once MariaDB is installed, create a database and user for PowerDNS. Log in to the MariaDB shell:

sudo mysql -u root -p

Then, run the following commands to create a database and user for PowerDNS:

CREATE DATABASE powerdns;
CREATE USER 'powerdns_user'@'localhost' IDENTIFIED BY 'yourpassword';
GRANT ALL PRIVILEGES ON powerdns.* TO 'powerdns_user'@'localhost';
FLUSH PRIVILEGES;
EXIT;
            

This sets up the database for PowerDNS, preparing it for installation, whether you’re hosting locally or on a Linux VPS hosting UK.

Step 4: Install PowerDNS

PowerDNS can be installed using the official repositories. Run the following commands to install PowerDNS and the MySQL backend:

sudo dnf install pdns pdns-backend-mysql -y
            

After installation, configure PowerDNS to use the MySQL backend by editing the PowerDNS configuration file:

sudo nano /etc/pdns/pdns.conf

Add or update the following lines to connect PowerDNS to your MariaDB database:

launch=gmysql
gmysql-host=localhost
gmysql-user=powerdns_user
gmysql-password=yourpassword
gmysql-dbname=powerdns
            

Save the file and restart PowerDNS:

sudo systemctl restart pdns
sudo systemctl enable pdns
            

PowerDNS is now installed and connected to the database. This setup will work for both local environments and cloud-based servers such as a Linux VPS Italy.

Step 5: Install PowerAdmin

PowerAdmin is a web-based tool for managing PowerDNS. Install the necessary dependencies for PowerAdmin:

sudo dnf install httpd php php-mysqlnd php-mbstring php-xml -y
            

Download PowerAdmin from GitHub:

cd /var/www/html
sudo git clone https://github.com/poweradmin/poweradmin.git
            

Set the correct permissions for the PowerAdmin directory:

sudo chown -R apache:apache /var/www/html/poweradmin
            

Restart Apache to apply the changes:

sudo systemctl restart httpd

Step 6: Configure PowerAdmin

Navigate to http://your-server-ip/poweradmin/install/ in your web browser to complete the PowerAdmin installation. Enter the database details you created for PowerDNS, and follow the prompts to finish the setup.

After completing the setup, you will have access to the PowerAdmin web interface to manage your PowerDNS server, whether it is hosted locally or on a Linux VPS hosting UK.

Step 7: Secure PowerAdmin with Let’s Encrypt SSL

To secure your PowerAdmin instance, you can use Let’s Encrypt to obtain a free SSL certificate. Install Certbot:

sudo dnf install certbot python3-certbot-apache

Run Certbot to obtain and configure the SSL certificate for your domain:

sudo certbot --apache -d your-domain.com

Certbot will automatically configure Apache to use SSL, ensuring that your PowerAdmin interface is securely accessible, whether locally or on a Linux VPSVirtual Private Server hosting environment.

Step 1: Update Your System

Before installing any new software, ensure your system is updated. Run the following commands to update and upgrade your Rocky Linux system:

sudo dnf update -y && sudo dnf upgrade -y

This ensures your system has the latest security patches and updates, which is essential whether you’re deploying PowerDNS on a local machine or on a VPS Linux VPSServers platform.

Step 2: Install MariaDB

PowerDNS requires a database to store its zone and record data. We will use MariaDB for this setup. Install MariaDB using the following commands:

sudo dnf install mariadb-server mariadb -y
sudo systemctl start mariadb
sudo systemctl enable mariadb
            

Secure the MariaDB installation by running the following:

sudo mysql_secure_installation

Follow the prompts to secure your installation, including setting a root password and removing anonymous users.

Step 3: Create a Database for PowerDNS

Once MariaDB is installed, create a database and user for PowerDNS. Log in to the MariaDB shell:

sudo mysql -u root -p

Then, run the following commands to create a database and user for PowerDNS:

CREATE DATABASE powerdns;
CREATE USER 'powerdns_user'@'localhost' IDENTIFIED BY 'yourpassword';
GRANT ALL PRIVILEGES ON powerdns.* TO 'powerdns_user'@'localhost';
FLUSH PRIVILEGES;
EXIT;
            

This sets up the database for PowerDNS, preparing it for installation, whether you’re hosting locally or on a Linux VPS hosting UK.

Step 4: Install PowerDNS

PowerDNS can be installed using the official repositories. Run the following commands to install PowerDNS and the MySQL backend:

sudo dnf install pdns pdns-backend-mysql -y
            

After installation, configure PowerDNS to use the MySQL backend by editing the PowerDNS configuration file:

sudo nano /etc/pdns/pdns.conf

Add or update the following lines to connect PowerDNS to your MariaDB database:

launch=gmysql
gmysql-host=localhost
gmysql-user=powerdns_user
gmysql-password=yourpassword
gmysql-dbname=powerdns
            

Save the file and restart PowerDNS:

sudo systemctl restart pdns
sudo systemctl enable pdns
            

PowerDNS is now installed and connected to the database. This setup will work for both local environments and cloud-based servers such as a Linux VPS Italy.

Step 5: Install PowerAdmin

PowerAdmin is a web-based tool for managing PowerDNS. Install the necessary dependencies for PowerAdmin:

sudo dnf install httpd php php-mysqlnd php-mbstring php-xml -y
            

Download PowerAdmin from GitHub:

cd /var/www/html
sudo git clone https://github.com/poweradmin/poweradmin.git
            

Set the correct permissions for the PowerAdmin directory:

sudo chown -R apache:apache /var/www/html/poweradmin
            

Restart Apache to apply the changes:

sudo systemctl restart httpd

Step 6: Configure PowerAdmin

Navigate to http://your-server-ip/poweradmin/install/ in your web browser to complete the PowerAdmin installation. Enter the database details you created for PowerDNS, and follow the prompts to finish the setup.

After completing the setup, you will have access to the PowerAdmin web interface to manage your PowerDNS server, whether it is hosted locally or on a Linux VPS hosting UK.

Step 7: Secure PowerAdmin with Let’s Encrypt SSL

To secure your PowerAdmin instance, you can use Let’s Encrypt to obtain a free SSL certificate. Install Certbot:

sudo dnf install certbot python3-certbot-apache

Run Certbot to obtain and configure the SSL certificate for your domain:

sudo certbot --apache -d your-domain.com

Certbot will automatically configure Apache to use SSL, ensuring that your PowerAdmin interface is securely accessible, whether locally or on a Linux VPSVirtual Private Server hosting environment.